Installation

How to Measure Your Yard for Artificial Turf

Measure your yard for turf correctly: length × width, waste factor, how roll width changes seams, and how many square feet a roll covers.

Basic measurement and the waste factor

Break your yard into rectangles and measure each one's length and width in feet; multiply to get square feet, then add them together. Add a waste factor — typically around 10% — for cutting around curves, trees, borders, and edges. Odd shapes and lots of landscape features push waste higher; a plain rectangular lawn wastes less.

One roll note: turf commonly comes in 15-foot widths, so a 100-foot roll covers about 1,500 square feet. Width drives everything — a 14-foot-wide area still consumes a full 15-foot width of material, so an accurate sketch saves money.

Why grain direction matters

Turf blades all lean the same direction — the grain. If two sections are laid with the grain pointing different ways, they look like two different shades of green, even when they're the same product. Every section of your install should be laid with the grain running the same direction. When we measure for you, we plan the layout, seams, and grain before you order a single roll — that planning is free with every quote.

Ready to transform your outdoor space?

Call us or request your free quote. We'll help you pick the right turf for your project anywhere in the RGV.